MikroTik VPN Configuration (PPTP)
MikroTik routers support IKv6 security protocol and the operating system is based on Linux Kernel and is compatible with many applications used by various internet service providers. MikroTik routers also support VPNs, which is as good as a blessing.
Things to Consider:
Before you begin, please make sure that:
You have a working internet connection
MikroTik PPTP Supported Router
A Mikrotik PPTP VPN account (if you haven’t bought it yet, click https://secure.bgsawebhosting.com/billing/index.php?_url=/order to buy)
The following is a setup guide for PPTP Client on MikroTik:
- Login in to your router. Click PPP and select PPTP client.
01 Mikrotik PPTP
- Enter QCPPTPVPN in the Name section.
02 Mikrotik PPTP
- Click Dial Out and enter the server address you want to connect with.
A list of server addresses is available here. Now, enter your Mikrotik PPTP VPN username and password in the User and Password fields respectively. For further instructions on how to check your active PPTP VPN username and password click https://secure.bgsawebhosting.com/billing/index.php?_url=/ . Check-mark the dial on demand and add default route options. Click on Apply/OK to save your settings. Note: If you face any problem in connecting VPN then uncheck ‘Add Default Route’
03 Mikrotik PPTP VPN
- Now click IP from main menu and select Firewall.
04 VPN on Mikrotik PPTP
- Now choose the NAT tab and add a new NAT rule. choose scrnat from chain and QCPPTPVPN from Out Interface List.
05 Mikrotik PPTP
- Now, click the Action tab and select masquerade from the dropdown list. Click Apply/OK to save the settings.
06 Mikrotik PPTP VPN
- Now select the Mangle tab and add a new rule. In the General, tab, choose prerouting from the chain list. Then enter the IP address you wish to connect with or the range of the IP addresses you want to route through the VPN tunnel in the Src Address field.
Note: The IP address you are supposed to enter is your Public IP address. In order to view your Public IP address, please click here.
07 Mikrotik PPTP
- Now choose the Action tab and choose mark routing from the Action list. Type QCPPTPVPN in the New Routing Mark field and save the settings.
08 Mikrotik PPTP
- Click IP from the main menu and choose Routes.
09 Mikrotik PPTP
- Now click the ‘+’ icon to add a new route. Enter 0.0.0.0/0 in the Dst. Address, choose QCPPTPVPN from Gateway and then choose QCPPTPVPN from the Routing Mark. Click Apply/OK to save your settings.
10 Mikrotik PPTP
- Now click IP from the main menu and select DNS.
- Check-mark Allow Remote Requests and save the settings.
12 Mikrotik PPTP
- Click IP from the main menu and select DHCP Server.
13 Mikrotik PPTP
- Now enter 188.8.131.52, 184.108.40.206 (These are Google and CloudFlare addresses, you can enter any DNS address of your choice) in DNS Servers fields. Click Apply/OK to save your settings.
- Now click Interfaces from the main menu, open the QCPPTPVPN interface, and enable the connection from the status tab.
That’s about it. Enjoy total and unlimited internet freedom with BGSA VPN Hosting!